EsPing is a control that makes it easy to build IP network diagnostic tools by use of
the of the Internet ICMP protocol. A so called Ping client is a snap to build.
RegSvr32.exe can be found on the Visual Basic 4.0 CD-ROM and in our ftp archive (ftp.brattberg.se). If RegSvr32.exe fails, it's
probably because you don't have the MFC 4.0 DLL library installed on your system. This is
available from many sources on the Internet including our ftp archive as MFCDLLS.ZIP.
Regsvr32.exe is also included in this archive. If you want to check if you already got the
files in mfcdlls.zip they are
When an error is encountered you find a code describing the error here.
10013 - WSAEACCES, Permission denied.
An attempt was made to access a socket in a way forbidden by its access permissions. An
example is using a broadcast address for sendto without broadcast permission being set
10048 - WSAEADDRINUSE, Address already in use.
Only one usage of each socket address (protocol/IP address/port) is normally permitted.
This error occurs if an application attempts to bind a socket to an IP address/port that
has already been used for an existing socket, or a socket that wasn't closed properly, or
one that is still in the process of closing. For server applications that need to bind
multiple sockets to the same port number, consider using setsockopt(SO_REUSEADDR). Client
applications usually need not call bind at all - connect will choose an unused port
10049 - WSAEADDRNOTAVAIL, Cannot assign requested address.
The requested address is not valid in its context. Normally results from an attempt to
bind to an address that is not valid for the local machine, or connect/sendto an address
or port that is not valid for a remote machine (e.g. port 0).
10047 - WSAEAFNOSUPPORT, Address family not supported by protocol family.
An address incompatible with the requested protocol was used. All sockets are created with
an associated "address family" (i.e. AF_INET for Internet Protocols) and a
generic protocol type (i.e. SOCK_STREAM). This error will be returned if an incorrect
protocol is explicitly requested in the socket call, or if an address of the wrong family
is used for a socket, e.g. in sendto.
10037 - WSAEALREADY, Operation already in progress.
An operation was attempted on a non-blocking socket that already had an operation in
progress - i.e. calling connect a second time on a non-blocking socket that is already
connecting, or canceling an asynchronous request (WSAAsyncGetXbyY) that has already been
canceled or completed.
10053 - WSAECONNABORTED, Software caused connection abort.
An established connection was aborted by the software in your host machine, possibly due
to a data transmission timeout or protocol error.
10061 - WSAECONNREFUSED, Connection refused.
No connection could be made because the target machine actively refused it. This usually
results from trying to connect to a service that is inactive on the foreign host - i.e.
one with no server application running.
10054 - WSAECONNRESET, Connection reset by peer.
A existing connection was forcibly closed by the remote host. This normally results if the
peer application on the remote host is suddenly stopped, the host is rebooted, or the
remote host used a "hard close" (see setsockopt for more information on the
SO_LINGER option on the remote socket.)
10039 - WSAEDESTADDRREQ, Destination address required.
A required address was omitted from an operation on a socket. For example, this error will
be returned if sendto is called with the remote address of ADDR_ANY.
10014 - WSAEFAULT, Bad address.
The system detected an invalid pointer address in attempting to use a pointer argument of
a call. This error occurs if an application passes an invalid pointer value, or if the
length of the buffer is too small. For instance, if the length of an argument which is a
struct sockaddr is smaller than sizeof(struct sockaddr).
10064 - WSAEHOSTDOWN, Host is down.
A socket operation failed because the destination host was down. A socket operation
encountered a dead host. Networking activity on the local host has not been initiated.
These conditions are more likely to be indicated by the error WSAETIMEDOUT.
10065 - WSAEHOSTUNREACH, No route to host.
A socket operation was attempted to an unreachable host. See WSAENETUNREACH
10036 - WSAEINPROGRESS, Operation now in progress.
A blocking operation is currently executing. Windows Sockets only allows a single blocking
operation to be outstanding per task (or thread), and if any other function call is made
(whether or not it references that or any other socket) the function fails with the
10004 - WSAEINTR, Interrupted function call.
A blocking operation was interrupted by a call to WSACancelBlockingCall.
10022 - WSAEINVAL, Invalid argument.
Some invalid argument was supplied (for example, specifying an invalid level to the
setsockopt function). In some instances, it also refers to the current state of the socket
- for instance, calling accept on a socket that is not listening.
10056 - WSAEISCONN, Socket is already connected.
A connect request was made on an already connected socket. Some implementations also
return this error if sendto is called on a connected SOCK_DGRAM socket (For SOCK_STREAM
sockets, the to parameter in sendto is ignored), although other implementations treat this
as a legal occurrence.
10024 - WSAEMFILE, Too many open files.
Too many open sockets. Each implementation may have a maximum number of socket handles
available, either globally, per process or per thread.
10040 - WSAEMSGSIZE, Message too long.
A message sent on a datagram socket was larger than the internal message buffer or some
other network limit, or the buffer used to receive a datagram into was smaller than the
10050 - WSAENETDOWN, Network is down.
A socket operation encountered a dead network. This could indicate a serious failure of
the network system (i.e. the protocol stack that the WinSock DLL runs over), the network
interface, or the local network itself.
10052 - WSAENETRESET, Network dropped connection on reset.
The host you were connected to crashed and rebooted. May also be returned by setsockopt if
an attempt is made to set SO_KEEPALIVE on a connection that has already failed.
10051 - WSAENETUNREACH, Network is unreachable.
A socket operation was attempted to an unreachable network. This usually means the local
software knows no route to reach the remote host.
10055 - WSAENOBUFS, No buffer space available.
An operation on a socket could not be performed because the system lacked sufficient
buffer space or because a queue was full.
10042 - WSAENOPROTOOPT, Bad protocol option.
An unknown, invalid or unsupported option or level was specified in a getsockopt or
10057 - WSAENOTCONN, Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected and
(when sending on a datagram socket using sendto) no address was supplied. Any other type
of operation might also return this error - for example, setsockopt setting SO_KEEPALIVE
if the connection has been reset.
10038 - WSAENOTSOCK, Socket operation on non-socket.
An operation was attempted on something that is not a socket. Either the socket handle
parameter did not reference a valid socket, or for select, a member of an fd_set was not
10045 - WSAEOPNOTSUPP, Operation not supported.
The attempted operation is not supported for the type of object referenced. Usually this
occurs when a socket descriptor to a socket that cannot support this operation, for
example, trying to accept a connection on a datagram socket.
10046 - WSAEPFNOSUPPORT, Protocol family not supported.
The protocol family has not been configured into the system or no implementation for it
exists. Has a slightly different meaning to WSAEAFNOSUPPORT, but is interchangeable in
most cases, and all Windows Sockets functions that return one of these specify
10067 - WSAEPROCLIM, Too many processes.
A Windows Sockets implementation may have a limit on the number of applications that may
use it simultaneously. WSAStartup may fail with this error if the limit has been reached.
10043 - WSAEPROTONOSUPPORT, Protocol not supported.
The requested protocol has not been configured into the system, or no implementation for
it exists. For example, a socket call requests a SOCK_DGRAM socket, but specifies a stream
10041 - WSAEPROTOTYPE, Protocol wrong type for socket.
A protocol was specified in the socket function call that does not support the semantics
of the socket type requested. For example, the ARPA Internet UDP protocol cannot be
specified with a socket type of SOCK_STREAM.
10058 - WSAESHUTDOWN, Cannot send after socket shutdown.
A request to send or receive data was disallowed because the socket had already been shut
down in that direction with a previous shutdown call. By calling shutdown a partial close
of a socket is requested, which is a signal that sending or receiving or both has been
10044 - WSAESOCKTNOSUPPORT, Socket type not supported.
The support for the specified socket type does not exist in this address family. For
example, the optional type SOCK_RAW might be selected in a socket call, and the
implementation does not support SOCK_RAW sockets at all.
10060 - WSAETIMEDOUT, Connection timed out.
A connection attempt failed because the connected party did not properly respond after a
period of time, or established connection failed because connected host has failed to
10035 - WSAEWOULDBLOCK, Resource temporarily unavailable.
This error is returned from operations on non-blocking sockets that cannot be completed
immediately, for example recv when no data is queued to be read from the socket. It is a
non-fatal error, and the operation should be retried later. It is normal for
WSAEWOULDBLOCK to be reported as the result from calling connect on a non-blocking
SOCK_STREAM socket, since some time must elapse for the connection to be established.
11001 - WSAHOST_NOT_FOUND, Host not found.
No such host is known. The name is not an official hostname or alias, or it cannot be
found in the database(s) being queried. This error may also be returned for protocol and
service queries, and means the specified name could not be found in the relevant database.
(OS dependent) - WSA_INVALID_HANDLE, Specified event object handle is invalid.
An application attempts to use an event object, but the specified handle is not valid.
(OS dependent) - WSA_INVALID_PARAMETER, One or more parameters are invalid.
An application used a Windows Sockets function which directly maps to a Win32 function.
The Win32 function is indicating a problem with one or more parameters.
(OS dependent) - WSAINVALIDPROCTABLE, Invalid procedure table from service
A service provider returned a bogus proc table to WS2_32.DLL. (Usually caused by one or
more of the function pointers being NULL.)
(OS dependent) - WSAINVALIDPROVIDER, Invalid service provider version number.
A service provider returned a version number other than 2.0.
(OS dependent) - WSA_IO_PENDING, Overlapped operations will complete later.
The application has initiated an overlapped operation which cannot be completed
immediately. A completion indication will be given at a later time when the operation has
(OS dependent) - WSA_IO_INCOMPLETE, Overlapped I/O event object not in signaled
The application has tried to determine the status of an overlapped operation which is not
yet completed. Applications that use WSAWaitForMultipleEvents in a polling mode to
determine when an overlapped operation has completed will get this error code until the
operation is complete.
(OS dependent) - WSA_NOT_ENOUGH_MEMORY, Insufficient memory available.
An application used a Windows Sockets function which directly maps to a Win32 function.
The Win32 function is indicating a lack of required memory resources.
10093 - WSANOTINITIALISED, Successful WSAStartup not yet performed.
Either the application hasnt called WSAStartup or WSAStartup failed. The application
may be accessing a socket which the current active task does not own (i.e. trying to share
a socket between tasks), or WSACleanup has been called too many times.
11004 - WSANO_DATA, Valid name, no data record of requested type.
The requested name is valid and was found in the database, but it does not have the
correct associated data being resolved for. The usual example for this is a hostname ->
address translation attempt (using gethostbyname or WSAAsyncGetHostByName) which uses the
DNS (Domain Name Server), and an MX record is returned but no A record - indicating the
host itself exists, but is not directly reachable.
11003 - WSANO_RECOVERY, This is a non-recoverable error.
This indicates some sort of non-recoverable error occurred during a database lookup. This
may be because the database files (e.g. BSD-compatible HOSTS, SERVICES or PROTOCOLS files)
could not be found, or a DNS request was returned by the server with a severe error.
(OS dependent) - WSAPROVIDERFAILEDINIT, Unable to initialize a service
Either a service provider's DLL could not be loaded (LoadLibrary failed) or the provider's
WSPStartup/NSPStartup function failed.
(OS dependent) - WSASYSCALLFAILURE, System call failure.
Returned when a system call that should never fail does. For example, if a call to
WaitForMultipleObjects fails or one of the registry functions fails trying to manipulate
10091 - WSASYSNOTREADY, Network subsystem is unavailable.
This error is returned by WSAStartup if the Windows Sockets implementation cannot function
at this time because the underlying system it uses to provide network services is
currently unavailable. Users should check:
· that the appropriate Windows Sockets DLL file is in the current path,
· that they are not trying to use more than one Windows Sockets implementation
simultaneously. If there is more than one WINSOCK DLL on your system, be sure the first
one in the path is appropriate for the network subsystem currently loaded.
· the Windows Sockets implementation documentation to be sure all necessary components
are currently installed and configured correctly.
11002 - WSATRY_AGAIN, Non-authoritative host not found.
This is usually a temporary error during hostname resolution and means that the local
server did not receive a response from an authoritative server. A retry at some time later
may be successful.
10092 - WSAVERNOTSUPPORTED, WINSOCK.DLL version out of range.
The current Windows Sockets implementation does not support the Windows Sockets
specification version requested by the application. Check that no old Windows Sockets DLL
files are being accessed.
10094 - WSAEDISCON, Graceful shutdown in progress.
Returned by recv, WSARecv to indicate the remote party has initiated a graceful shutdown
(OS dependent) - WSA_OPERATION_ABORTED, Overlapped operation aborted.
An overlapped operation was canceled due to the closure of the socket, or the execution of
the SIO_FLUSH command in WSAIoctl.
Set This property to the hostname or the IP-address of the server you want to check
before you call the Ping method.
The Timeout property is the time in milliseconds ( defaults to five seconds )
that should elapse before a sent package should be regarded as lost.
Set this property to the number of packets that should be sent.
This event reports the replies during a ping session.
It is possible that you are reading this documentation without having access to the
control itself. If you have Internet access you just need to connect to http://www.brattberg.se and fetch a fully working
sample of the control. At this location you can also find samples on how to use the
We can email the control anywhere in the world if you send us a request to do so.
Please state if you want MIME or BINHEX coding. Send request to email@example.com
If you use the unregistered version of the control a splash screen is displayed from
time to time reminding you to register.To get rid of this nag-screen you need to register.
Information is available at our site.
We ship anywhere in the world with World-wide First Class/Airmail if you select this
option. The only media supported is 3.5" diskettes.The charge for this type of
delivery is $15 (USD) extra.
We also have set up a mailing lists for all the controls that is part of the Brattberg
Internet Control Pack. If you want to subscribe to the mailing list send a mail to firstname.lastname@example.org with "subscribe
bicp your name" in the body of the message. This will make you a subscriber of
the list. You can also send a mail with "help" in the body of the
messsage to get more information. If you want to send a message to the list send it to email@example.com.
We also have a general list called "brattberg" where we announce product
updates and other info/news.